Pave Bloom Earrings Tutorial

Cut and Prepare the Wire Cut a length of 26-gauge wire and gather the center bead and crystal beads. Add the Center Bead Position the center bead in the middle of the wire, leaving equal lengths of wire on both sides. Add the First Crystal Petal String a crystal onto one side of the wire and shape it around the center bead. Create the Flower Shape Continue adding crystals around the center bead, weaving the wire through the crystals to form a balanced bloom. Adjust the Crystal Placement Gently pull and shape the wire so the crystals sit evenly around the center and create a pavé-style effect. Thread Through the Top Crystal Guide one wire end through the top crystal to bring both wire ends together above the flower. Secure the Design Pull the wires gently until the flower is snug and symmetrical, being careful not to crack the crystals. Twist the Wire Ends Twist the two wire ends together several times above the flower to lock the design in place. Create a Wrapped Loop Use round nose pliers to form a loop, then wrap the remaining wire around the neck of the loop to secure it. Finish the Earrings Trim excess wire, tuck in any sharp ends, and attach an ear wire to the loop to complete the earring.