Learn to create the Vapor Simple Bead Embroidery Earrings, a beginner-friendly project that teaches you how to bezel a cabochon with 11/0 seed beads, apply brick stitch with a picot trim, and finish a clean, professional earring backing. Using a 10mm cabochon, ultra-suede backing, size 10 needle, and gray thread, you’ll master techniques like two-bead backstitch, thread tensioning, trimming fabric, and creating decorative edge finishes. Personalize your earrings by choosing different seed bead colors, cabochon centers, or backing materials for stylish everyday or statement pieces.
Glue the Cabochon:
Attach the 10mm cabochon to the ultra-suede backing using a strong jewelry glue. Let it dry completely.
Start Two-Bead Backstitch:
Thread a size 10 beading needle with gray DragonThread. Pick up two 11/0 seed beads, stitch near the cabochon’s edge, and secure. Continue adding pairs of beads around the cabochon.
Reinforce the Bead Ring:
Sew through all added beads a second time to tighten and secure the bezel.
Trim the Backing:
Carefully cut the ultra-suede close to the outer bead line, keeping the cut even without cutting the thread.
Prepare Brick Stitch Edge:
Start the decorative edge using three-bead picot groups: pick up three 11/0s, skip one bead, and stitch through the next.
Work Around the Perimeter:
Continue adding three-bead picot groups evenly around the earring edge for a uniform decorative finish.
Secure Final Stitches:
As you finish the last beads, loop through and reinforce the connections.
Tie Off the Thread:
Knot the thread securely on the back side, weaving into several beads for extra strength.
Burn and Smooth Ends:
Use a thread zapper or lighter to carefully burn off and seal any loose thread tails.
Attach Earwire:
Use a jump ring or wire to connect the earring to an earwire for wearing.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Potomac Bead Company is my favorite supplier for beads and materials. I love the extensive learning resources and designs.
Share
Karen S.
07-22-25
Like your products. Your prices are great too. Wish you had more products online. Wanted both bottles of Permaloc but one was out of stock.
Share
Penny R.
07-22-25
Still had trouble finding the spot where my creator cash was expected it to be with coupons. But that is my problem. The website is fine. The products are fantastic and customer service is wonderful.
Share
Michele H.
07-22-25
I love Potomac beads
Share
Tami S.
07-22-25
Great products and fast shipping
Share
Kathy B.
07-22-25
Great products and excellent customer service. Easy to navigate website.
Share
ISABEL M.
07-22-25
It's fun shopping at PotomacBeads, it's easy and you'll find anything your looking for.
Share
JAM
07-22-25
Always easy!
Share
Caroline A.
07-22-25
Love the beads.
Share
Vickie B.
07-22-25
I love the products
Share
Loading...
Only Visible on Admin Mode
Item Description
Learn to create the Vapor Simple Bead Embroidery Earrings, a beginner-friendly project that teaches you how to bezel a cabochon with 11/0 seed beads, apply brick stitch with a picot trim, and finish a clean, professional earring backing. Using a 10mm cabochon, ultra-suede backing, size 10 needle, and gray thread, you’ll master techniques like two-bead backstitch, thread tensioning, trimming fabric, and creating decorative edge finishes. Personalize your earrings by choosing different seed bead colors, cabochon centers, or backing materials for stylish everyday or statement pieces.
Glue the Cabochon:
Attach the 10mm cabochon to the ultra-suede backing using a strong jewelry glue. Let it dry completely.
Start Two-Bead Backstitch:
Thread a size 10 beading needle with gray DragonThread. Pick up two 11/0 seed beads, stitch near the cabochon’s edge, and secure. Continue adding pairs of beads around the cabochon.
Reinforce the Bead Ring:
Sew through all added beads a second time to tighten and secure the bezel.
Trim the Backing:
Carefully cut the ultra-suede close to the outer bead line, keeping the cut even without cutting the thread.
Prepare Brick Stitch Edge:
Start the decorative edge using three-bead picot groups: pick up three 11/0s, skip one bead, and stitch through the next.
Work Around the Perimeter:
Continue adding three-bead picot groups evenly around the earring edge for a uniform decorative finish.
Secure Final Stitches:
As you finish the last beads, loop through and reinforce the connections.
Tie Off the Thread:
Knot the thread securely on the back side, weaving into several beads for extra strength.
Burn and Smooth Ends:
Use a thread zapper or lighter to carefully burn off and seal any loose thread tails.
Attach Earwire:
Use a jump ring or wire to connect the earring to an earwire for wearing.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
