The tutorial begins from the back of the pendant, constructing a circular bezel using SuperDuos and 11/0 seed beads. The instructor demonstrates how to build a stable ring foundation, step up correctly between SuperDuo holes, and add a second structured row before incorporating crystals. Careful tightening ensures the base is even and symmetrical before the focal stone is added. The final step adds a crystal accent at the top and forms a reinforced looped bail for cord attachment. The project concludes with thread management and secure finishing techniques.
Potomac Crystal Rivolis - Crystal AB 18mm | Pack of 2, 1 Piece
Step 3: Need More Help? Follow these Steps
Quick Project Steps
Prep materials & thread:
Thread your needle with about 5 feet of size 6 Dragon Thread. Add beads in the starting sequence (1 SuperDuo + 2 size 11/0 seed beads) repeated 10 times, finishing with seed beads, and tie into a tight loop.
Step up to the second hole:
Sew through the first SuperDuo and step up into its second hole to prepare for building the next round.
Add second SuperDuo row:
Pick up 1 SuperDuo and 1 size 11/0 seed bead, then sew into the next SuperDuo’s second hole. Repeat around to add 10 SuperDuos total.
Insert crystal rondelles:
Add 2 size 11/0 seed beads, 1 crystal rondelle, and 2 more 11/0s. Skip the 11/0–SuperDuo–11/0 set and sew into the next SuperDuo’s second hole. Repeat all the way around.
Drop in the 18mm Rivoli:
Place the Rivoli inside the bezel base. Begin forming the front bezel by adding 2 size 11/0 seed beads between each crystal around the circle.
Tighten & reinforce the bezel:
Sew through all front beads again, pulling tension toward the center. Make 2–3 reinforcement passes to securely lock the Rivoli in place.
Add outer crystal–SuperDuo layer:
Step up to the outer SuperDuo holes. Add 1 crystal, 1 SuperDuo, and 1 crystal between each section. Repeat 10 times around.
Create butterfly arches:
Add 4 size 11/0 seed beads, sew into the recessed SuperDuo below, then back up through bead 3. Add 3 seed beads and sew into the next top SuperDuo. Repeat around to form arched “butterfly” loops.
Add top crystal accent:
Pick up 1 size 11/0, 1 crystal, and 1 size 11/0. Sew into the opposite SuperDuo to create the top connection point.
Make & reinforce the bail:
Create a loop of 11 seed beads through the top crystal, repeat on the opposite side, and reinforce the loops. Weave thread back through the beadwork, tie off securely, trim or burn ends, and finish.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
The tutorial begins from the back of the pendant, constructing a circular bezel using SuperDuos and 11/0 seed beads. The instructor demonstrates how to build a stable ring foundation, step up correctly between SuperDuo holes, and add a second structured row before incorporating crystals. Careful tightening ensures the base is even and symmetrical before the focal stone is added. The final step adds a crystal accent at the top and forms a reinforced looped bail for cord attachment. The project concludes with thread management and secure finishing techniques.
Designer's Material List
The designer's suggested colors & materials:
SuperDuo Beads - Vintage Copper 2.5x5mm, 30 Beads
Potomac Crystal Rondelle Beads - Aqua AB 2x3mm | Pack of 150, 31 Beads
Potomac Crystal Rivolis - Crystal AB 18mm | Pack of 2, 1 Piece
Project Steps
Prep materials & thread:
Thread your needle with about 5 feet of size 6 Dragon Thread. Add beads in the starting sequence (1 SuperDuo + 2 size 11/0 seed beads) repeated 10 times, finishing with seed beads, and tie into a tight loop.
Step up to the second hole:
Sew through the first SuperDuo and step up into its second hole to prepare for building the next round.
Add second SuperDuo row:
Pick up 1 SuperDuo and 1 size 11/0 seed bead, then sew into the next SuperDuo’s second hole. Repeat around to add 10 SuperDuos total.
Insert crystal rondelles:
Add 2 size 11/0 seed beads, 1 crystal rondelle, and 2 more 11/0s. Skip the 11/0–SuperDuo–11/0 set and sew into the next SuperDuo’s second hole. Repeat all the way around.
Drop in the 18mm Rivoli:
Place the Rivoli inside the bezel base. Begin forming the front bezel by adding 2 size 11/0 seed beads between each crystal around the circle.
Tighten & reinforce the bezel:
Sew through all front beads again, pulling tension toward the center. Make 2–3 reinforcement passes to securely lock the Rivoli in place.
Add outer crystal–SuperDuo layer:
Step up to the outer SuperDuo holes. Add 1 crystal, 1 SuperDuo, and 1 crystal between each section. Repeat 10 times around.
Create butterfly arches:
Add 4 size 11/0 seed beads, sew into the recessed SuperDuo below, then back up through bead 3. Add 3 seed beads and sew into the next top SuperDuo. Repeat around to form arched “butterfly” loops.
Add top crystal accent:
Pick up 1 size 11/0, 1 crystal, and 1 size 11/0. Sew into the opposite SuperDuo to create the top connection point.
Make & reinforce the bail:
Create a loop of 11 seed beads through the top crystal, repeat on the opposite side, and reinforce the loops. Weave thread back through the beadwork, tie off securely, trim or burn ends, and finish.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
