This tutorial demonstrates how to create the Czech Leaf Falling Fringe Necklace, a draped, nature-inspired design that combines RounTrio beads, crystals, seed beads, and Czech glass leaf drops to mimic cascading autumn leaves. This design blends multi-hole bead structure with organic movement, teaching viewers how to build intricate fringe pieces that are customizable in color, length, and texture.
Prep thread:
Cut ~4–5 ft thread, knot or add a stop bead near one end so beads won’t slide.
String top row (RounTrio foundation):
String a RounTrio, add 8/0s as spacers, next RounTrio, continue until you have the number needed for your neckline. Example: 9 RounTrios ≈ collar / 16–18 in including chain; adjust to taste.
Work the middle (second-hole) row:
Using the RounTrio middle hole, pick up 11/0 → small crystal/rondelle → 11/0 between each RounTrio so a second tier forms under the top row. Pull snug so the row drapes slightly below the top row.
Build the lowest drape (third-hole row):
From the RounTrio third hole, add a longer string: 8/0s + crystal + 8/0s to create a deeper drape. This becomes the row that will anchor the leaf fringe.
Position the first leaf fringe:
Exit the bead where you want the first leaf. Pick up: 8/0 → crystal → 11/0 → Czech leaf → 11/0 → crystal → 8/0 and sew back into the main drape bead to lock the leaf. Pull to set the leaf so it hangs naturally.
Repeat fringe across the row:
Continue adding leaf units between every 1–2 RounTrios (or at chosen intervals) to create a falling pattern — vary lengths slightly for a natural look (e.g., alternate one long leaf, one short leaf).
Make the necklace cords:
From each outer RounTrio, string matching double-strand cords of alternating 8/0 + small crystals to the clasp area. Make both sides mirror each other for balanced drape.
Attach cup-button clasp / loop:
At one cord end build a seed-bead loop sized to your cup button (string 10–30 × 11/0 depending on button). At the other end, reinforce with several passes through the beads and a small wire guard or the button base; reinforce with 2–3 extra passes.
Reinforce all joins:
Sew back through key connection points (RounTrios, leaf anchors, clasp area) at least once to strengthen the piece. Pay attention to any single-pass beads and add an extra pass.
Finish & trim:
Bury the thread by weaving into nearby bead bridges, tie a small weaver’s knot if desired, trim and zap (or seal) tails. Check that leaves hang freely and cords sit symmetrically.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
This tutorial demonstrates how to create the Czech Leaf Falling Fringe Necklace, a draped, nature-inspired design that combines RounTrio beads, crystals, seed beads, and Czech glass leaf drops to mimic cascading autumn leaves. This design blends multi-hole bead structure with organic movement, teaching viewers how to build intricate fringe pieces that are customizable in color, length, and texture.
Prep thread:
Cut ~4–5 ft thread, knot or add a stop bead near one end so beads won’t slide.
String top row (RounTrio foundation):
String a RounTrio, add 8/0s as spacers, next RounTrio, continue until you have the number needed for your neckline. Example: 9 RounTrios ≈ collar / 16–18 in including chain; adjust to taste.
Work the middle (second-hole) row:
Using the RounTrio middle hole, pick up 11/0 → small crystal/rondelle → 11/0 between each RounTrio so a second tier forms under the top row. Pull snug so the row drapes slightly below the top row.
Build the lowest drape (third-hole row):
From the RounTrio third hole, add a longer string: 8/0s + crystal + 8/0s to create a deeper drape. This becomes the row that will anchor the leaf fringe.
Position the first leaf fringe:
Exit the bead where you want the first leaf. Pick up: 8/0 → crystal → 11/0 → Czech leaf → 11/0 → crystal → 8/0 and sew back into the main drape bead to lock the leaf. Pull to set the leaf so it hangs naturally.
Repeat fringe across the row:
Continue adding leaf units between every 1–2 RounTrios (or at chosen intervals) to create a falling pattern — vary lengths slightly for a natural look (e.g., alternate one long leaf, one short leaf).
Make the necklace cords:
From each outer RounTrio, string matching double-strand cords of alternating 8/0 + small crystals to the clasp area. Make both sides mirror each other for balanced drape.
Attach cup-button clasp / loop:
At one cord end build a seed-bead loop sized to your cup button (string 10–30 × 11/0 depending on button). At the other end, reinforce with several passes through the beads and a small wire guard or the button base; reinforce with 2–3 extra passes.
Reinforce all joins:
Sew back through key connection points (RounTrios, leaf anchors, clasp area) at least once to strengthen the piece. Pay attention to any single-pass beads and add an extra pass.
Finish & trim:
Bury the thread by weaving into nearby bead bridges, tie a small weaver’s knot if desired, trim and zap (or seal) tails. Check that leaves hang freely and cords sit symmetrically.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
