The Summer Shadows Bracelet tutorial from Potomac Beads offers a beautiful design that plays with light and layers using two-hole DiscDuo beads, Halo spacers, crystals, and seed beads. This project combines practical beading skills with artistic flair, resulting in a bracelet that’s both elegant and reversible. Using a two-needle method, viewers learn how to create structure, dimension, and decorative top embellishments that mimic a shadowed or “bow-tie” effect over the DiscDuos.
Prepare Thread and Clasp:
Cut ~5 feet of thread and thread a needle on each end. Add: 15/0 – crystal – 15/0, then the cup button clasp (one needle through each hole). Add 3 × 15/0 on both needles. Join with 2 stacked spacers (both needles go through in the same direction).
Begin the Base Row:
On each needle: add 3 × Halo beads (gunmetal). Use one needle to pass through: 1st hole of Halo → DiscDuo → 2nd hole of Halo. Use the second needle through the opposite side of the same Halo/DiscDuo set.
Decorate the First Side:
On each needle (per side): Add: 2 × 15/0, 1 spacer, 1 × 15/0, 1 crystal, 1 × 15/0, 1 spacer, 2 × 15/0. Loop back through the Halo + DiscDuo from the opposite direction to form the side decoration.
Repeat the Segment:
Continue adding Halo–DiscDuo pairs, decorating both sides with the same sequence. Repeat until you have 9 sets (adjust for desired length).
End the Base Row:
At the last Halo: add 3 × 15/0 on both needles. Pass both needles through 2 stacked spacers, then add 3–4 inches of 15/0s for the loop side of the clasp. Reinforce the loop by threading through again.
Add Top Embellishment (Shadow/Bow Tie Effect):
One needle: add 4 × 15/0, 1 crystal, 4 × 15/0, then cross diagonally through the opposite hole of the next DiscDuo. Other needle: thread 4 × 15/0, pass through the same crystal, add 4 more 15/0, and cross through the opposite side. This creates the “X” or shadow effect over the DiscDuos. Repeat between each DiscDuo pair.
Final Reinforcement:
Weave both threads back through spacers, seed beads, and the cup button. Tie a square knot securely between the thread ends. Hide the threads in nearby beads, then burn or zap the ends flush to finish.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
As always your tutorials are excellent and your products are tops. I always look forward to your e-mails.
Share
Anastasia B.
05-14-25
I like how you give substitutes to the pattern.
Share
Barbara H.
05-14-25
Always happy with Potomac Beads service, products, quality, and rapport. The tutorials are excellent and widely varied. Potomac Beads is my primary 'go to' place for beads and supplies.
Share
Barbara M.
05-14-25
I love the ease of pulling up a pattern, and having the items right there to order! It makes it so easy and fast. Thanks.
Share
Sharon E.
05-14-25
great
Share
Julia C.
05-14-25
Good website
Share
Loading...
Only Visible on Admin Mode
Item Description
The Summer Shadows Bracelet tutorial from Potomac Beads offers a beautiful design that plays with light and layers using two-hole DiscDuo beads, Halo spacers, crystals, and seed beads. This project combines practical beading skills with artistic flair, resulting in a bracelet that’s both elegant and reversible. Using a two-needle method, viewers learn how to create structure, dimension, and decorative top embellishments that mimic a shadowed or “bow-tie” effect over the DiscDuos.
Designer's Material List
The Designer’s suggested colors and materials for ~7.5-inch (19 cm) wrist:
DiscDuo - White Shimmer, 28 Pieces
Halo Bead 2H - Gunmetal, 10 Pieces
Potomac Crystal Bicone Beads - White Opal AB 4mm, 30 Pieces
Prepare Thread and Clasp:
Cut ~5 feet of thread and thread a needle on each end. Add: 15/0 – crystal – 15/0, then the cup button clasp (one needle through each hole). Add 3 × 15/0 on both needles. Join with 2 stacked spacers (both needles go through in the same direction).
Begin the Base Row:
On each needle: add 3 × Halo beads (gunmetal). Use one needle to pass through: 1st hole of Halo → DiscDuo → 2nd hole of Halo. Use the second needle through the opposite side of the same Halo/DiscDuo set.
Decorate the First Side:
On each needle (per side): Add: 2 × 15/0, 1 spacer, 1 × 15/0, 1 crystal, 1 × 15/0, 1 spacer, 2 × 15/0. Loop back through the Halo + DiscDuo from the opposite direction to form the side decoration.
Repeat the Segment:
Continue adding Halo–DiscDuo pairs, decorating both sides with the same sequence. Repeat until you have 9 sets (adjust for desired length).
End the Base Row:
At the last Halo: add 3 × 15/0 on both needles. Pass both needles through 2 stacked spacers, then add 3–4 inches of 15/0s for the loop side of the clasp. Reinforce the loop by threading through again.
Add Top Embellishment (Shadow/Bow Tie Effect):
One needle: add 4 × 15/0, 1 crystal, 4 × 15/0, then cross diagonally through the opposite hole of the next DiscDuo. Other needle: thread 4 × 15/0, pass through the same crystal, add 4 more 15/0, and cross through the opposite side. This creates the “X” or shadow effect over the DiscDuos. Repeat between each DiscDuo pair.
Final Reinforcement:
Weave both threads back through spacers, seed beads, and the cup button. Tie a square knot securely between the thread ends. Hide the threads in nearby beads, then burn or zap the ends flush to finish.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
