The Simple and Cute Earrings tutorial walks viewers through creating an easy, beginner-friendly earring design using 4mm Czech rounds and large-hole spacer beads arranged in a simple circular pattern. The project begins by alternating beads on a short length of thread, forming a small ring that becomes the base structure of the earring. This foundational technique reinforces how bead arrangement and repetition can create a polished, balanced design with minimal effort.
Prep materials & thread:
Cut about 12 inches of thread and thread your needle.
String the bead pattern:
Alternate six 4mm round beads with spacer beads on the thread.
Form the circle:
Sew back through all the beads to create a closed ring.
Tie and secure the base:
Pull tight and tie a right-over-left, left-over-right knot to secure the circle.
Position near a spacer bead:
Sew through beads so your thread exits next to a spacer bead for attaching the top finding.
Add the wire guard:
Pick up the wire guard and sew up one side and down the other so it sits above the spacer bead.
Attach to the spacer bead:
Sew back through the spacer bead to anchor the wire guard in place.
Reinforce the connection:
Pass through the wire guard and spacer bead again to strengthen the attachment.
Tie off the thread:
Secure with another knot close to the beadwork.
Trim & add ear wire:
Trim or burn thread ends and attach the ear wire through the wire guard.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
The Simple and Cute Earrings tutorial walks viewers through creating an easy, beginner-friendly earring design using 4mm Czech rounds and large-hole spacer beads arranged in a simple circular pattern. The project begins by alternating beads on a short length of thread, forming a small ring that becomes the base structure of the earring. This foundational technique reinforces how bead arrangement and repetition can create a polished, balanced design with minimal effort.
Designer's Material List
The designer's suggested colors & materials:
Athenacast Beads Large Hole Spacer 6mm Premium Real Silver, 12 Beads
Prep materials & thread:
Cut about 12 inches of thread and thread your needle.
String the bead pattern:
Alternate six 4mm round beads with spacer beads on the thread.
Form the circle:
Sew back through all the beads to create a closed ring.
Tie and secure the base:
Pull tight and tie a right-over-left, left-over-right knot to secure the circle.
Position near a spacer bead:
Sew through beads so your thread exits next to a spacer bead for attaching the top finding.
Add the wire guard:
Pick up the wire guard and sew up one side and down the other so it sits above the spacer bead.
Attach to the spacer bead:
Sew back through the spacer bead to anchor the wire guard in place.
Reinforce the connection:
Pass through the wire guard and spacer bead again to strengthen the attachment.
Tie off the thread:
Secure with another knot close to the beadwork.
Trim & add ear wire:
Trim or burn thread ends and attach the ear wire through the wire guard.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
