The Hexagonal Crystal Earrings tutorial is a quick, beginner-friendly beading project that teaches how to bezel a 14mm rivoli crystal into a geometric hexagonal frame using Tubelet beads, seed beads, and 3mm crystals. The design is simple yet elegant, showcasing how to build a six-sided bezel with connected peaks that both secure and highlight the rivoli. The piece is finished with delicate embellishments around the edge and topped with a bead and wire guard for easy attachment to ear wires. With clear instructions and creative flexibility, this project is ideal for earrings but can also be adapted into pendants, rings, or bracelet components.
Create the Base Hexagon:
Pick up: 1 × Tubelet → 1 × 11/0 → 1 × Tubelet → 1 × 11/0 — repeat until you have 6 Tubelets and 6 11/0s. Stitch into a circle and reinforce by going through all beads again.
Connect the Peaks (Front Bezel):
Between each 11/0, add: 1 × 15/0 → 1 × 3mm bicone → 1 × 15/0. Stitch into the next 11/0 and repeat around. Pull tight to form a crystal-pointed bezel around the front.
Add the Rivoli:
Place the 14mm rivoli face-up inside the bezel. Gently tighten your thread to start securing the crystal in place.
Build the Back Layer:
From a Tubelet, pick up: 1 × 15/0 → 3 × 11/0 → 1 × 15/0. Stitch into the next Tueblet and repeat for all 6. This forms the back netting to hold the rivoli in.
Reinforce the Back:
Stitch through all back layer beads again. Pull tight to lock the rivoli in securely.
Embellish the Outer Edge:
Between each Tubelet on the outer edge, add: 3 × 15/0 seed beads. Go around the entire perimeter to create a soft, finished edge.
Add the Wire Guard & Top Bead:
Exit a center top 11/0. Add: 1 × 15/0 → 1 × 11/0 (accent bead) → wire guard. Loop through the wire guard and back down through the same 11/0s. Reinforce by going through this loop 2–3 times.
Attach Ear Wire:
Slide your ear wire onto the wire guard loop. Close securely.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Large selection, very easy to find exactly what I'm looking for.
Share
Jan D.
07-04-25
Easy to navigate.
Share
Debra C.
07-04-25
I love making jewelry with the kits
Share
Abigail S.
07-04-25
Quick and efficient. Thank you.
Share
Maryam L.
07-04-25
Great!
Share
Cheryl P.
07-04-25
I don't like to be asked if I want additional items when checking out.
Share
Brenda L.
07-03-25
Great company to work with.
Share
Donna H.
07-03-25
the filter feature doesn't work well
Share
Denise F.
07-03-25
Always beautiful beads
Share
Margaret S.
07-03-25
You have a great online store! Very easy to navigate and find the size beads you are looking for.
Share
Loading...
Only Visible on Admin Mode
Item Description
The Hexagonal Crystal Earrings tutorial is a quick, beginner-friendly beading project that teaches how to bezel a 14mm rivoli crystal into a geometric hexagonal frame using Tubelet beads, seed beads, and 3mm crystals. The design is simple yet elegant, showcasing how to build a six-sided bezel with connected peaks that both secure and highlight the rivoli. The piece is finished with delicate embellishments around the edge and topped with a bead and wire guard for easy attachment to ear wires. With clear instructions and creative flexibility, this project is ideal for earrings but can also be adapted into pendants, rings, or bracelet components.
Designer's Material List
The designer's suggested colors & materials:
Tubelet Beads - Silver Labrador Full, 12 Beads
Potomac Crystal Bicone Beads - Tanzanite AB 3mm, 14 Beads
Create the Base Hexagon:
Pick up: 1 × Tubelet → 1 × 11/0 → 1 × Tubelet → 1 × 11/0 — repeat until you have 6 Tubelets and 6 11/0s. Stitch into a circle and reinforce by going through all beads again.
Connect the Peaks (Front Bezel):
Between each 11/0, add: 1 × 15/0 → 1 × 3mm bicone → 1 × 15/0. Stitch into the next 11/0 and repeat around. Pull tight to form a crystal-pointed bezel around the front.
Add the Rivoli:
Place the 14mm rivoli face-up inside the bezel. Gently tighten your thread to start securing the crystal in place.
Build the Back Layer:
From a Tubelet, pick up: 1 × 15/0 → 3 × 11/0 → 1 × 15/0. Stitch into the next Tueblet and repeat for all 6. This forms the back netting to hold the rivoli in.
Reinforce the Back:
Stitch through all back layer beads again. Pull tight to lock the rivoli in securely.
Embellish the Outer Edge:
Between each Tubelet on the outer edge, add: 3 × 15/0 seed beads. Go around the entire perimeter to create a soft, finished edge.
Add the Wire Guard & Top Bead:
Exit a center top 11/0. Add: 1 × 15/0 → 1 × 11/0 (accent bead) → wire guard. Loop through the wire guard and back down through the same 11/0s. Reinforce by going through this loop 2–3 times.
Attach Ear Wire:
Slide your ear wire onto the wire guard loop. Close securely.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
