Create the Showroom Crystal Earrings, a stylish and high-end looking design that mimics prong-set jewelry. This project features a clever use of SuperDuos, Miyuki 11/0 and 15/0 seed beads, and a 14mm Rivoli, encased using a technique that creates faux-prongs. Perfect for both beginners and advanced beaders, this tutorial shows how to use basic stitching techniques to form a bezel, add dimensional detailing, and attach a wire guard for earwires. Materials include DragonThread, beading needle, and optional wire guards. Personalize your earrings by changing bead colors or linking them into bracelets for a cohesive jewelry set.
Form the Base Circle:
Use 4 SuperDuos and tie them into a ring using about 3 feet of DragonThread. Step up to the second hole of one SuperDuo.
Add Second Row:
Add a sequence of 11/0 seed bead – SuperDuo – 11/0 seed bead between each existing SuperDuo to form the outer ring.
Create the First Prong:
Add 5 x 11/0 seed beads exiting a SuperDuo to form a curved arc. Step up through the middle bead (3rd bead) and add 5 x 15/0 seed beads to create a pointed prong.
Repeat Prongs:
Repeat the prong structure three more times to form a full bezel with four prongs.
Insert the Rivoli:
Slide the 14mm Rivoli crystal into the center before tightening and reinforcing the prongs.
Reinforce and Secure:
Stitch around the prongs again to reinforce the fit and tighten the structure.
Add Outer Embellishment:
Between the 11/0 seed beads at each corner, add 9 x 15/0 seed beads to create decorative edges.
Attach Wire Guard:
At the top center, exit from a 15/0 bead and add: 1 x 11/0, up through the wire guard, down the other side, another 11/0, and back through the center bead. Reinforce this loop for durability.
Finish:
Weave in and tie off thread ends securely. Burn excess thread and attach the earwire.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
Create the Showroom Crystal Earrings, a stylish and high-end looking design that mimics prong-set jewelry. This project features a clever use of SuperDuos, Miyuki 11/0 and 15/0 seed beads, and a 14mm Rivoli, encased using a technique that creates faux-prongs. Perfect for both beginners and advanced beaders, this tutorial shows how to use basic stitching techniques to form a bezel, add dimensional detailing, and attach a wire guard for earwires. Materials include DragonThread, beading needle, and optional wire guards. Personalize your earrings by changing bead colors or linking them into bracelets for a cohesive jewelry set.
Designer's Material List
The designer's suggested colors & materials:
SuperDuo Beads - Silver Labrador Full 2.5x5mm, 16 Beads
Form the Base Circle:
Use 4 SuperDuos and tie them into a ring using about 3 feet of DragonThread. Step up to the second hole of one SuperDuo.
Add Second Row:
Add a sequence of 11/0 seed bead – SuperDuo – 11/0 seed bead between each existing SuperDuo to form the outer ring.
Create the First Prong:
Add 5 x 11/0 seed beads exiting a SuperDuo to form a curved arc. Step up through the middle bead (3rd bead) and add 5 x 15/0 seed beads to create a pointed prong.
Repeat Prongs:
Repeat the prong structure three more times to form a full bezel with four prongs.
Insert the Rivoli:
Slide the 14mm Rivoli crystal into the center before tightening and reinforcing the prongs.
Reinforce and Secure:
Stitch around the prongs again to reinforce the fit and tighten the structure.
Add Outer Embellishment:
Between the 11/0 seed beads at each corner, add 9 x 15/0 seed beads to create decorative edges.
Attach Wire Guard:
At the top center, exit from a 15/0 bead and add: 1 x 11/0, up through the wire guard, down the other side, another 11/0, and back through the center bead. Reinforce this loop for durability.
Finish:
Weave in and tie off thread ends securely. Burn excess thread and attach the earwire.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
