This tutorial shows how to create the DiscDuo Path Bracelet using a simple right angle weave (RAW) pattern with DiscDuo beads, Tublets, and seed beads. It begins by forming a basic RAW unit and repeating a sequence of 11/0 → Tublet → 11/0 → DiscDuo to build the bracelet’s structure, then adds small decorative accents (11/0–15/0–11/0) on each side for extra detail while maintaining proper thread tension. The pattern is repeated to reach the desired length, making it an easy and relaxing project. The bracelet is finished by attaching a ball and hitch clasp, reinforcing the thread, and securing it with clean finishing techniques for a polished and customizable final piece.
Add Stop Bead
Place a stop bead on your thread to keep everything in place.
Start with DiscDuo
Pass through one hole of a DiscDuo bead.
Build First RAW Unit
Pick up: 11/0 → Tublet → 11/0 → DiscDuo → 11/0 → Tublet → 11/0, then go through the second hole of the first DiscDuo.
Reinforce the Unit
Go back through the top beads (11/0–Tublet–11/0) to complete the RAW “box.”
Move to Next Unit
Exit through the next DiscDuo hole to continue the pattern.
Add Side Decoration
Pick up 11/0 → 15/0 → 11/0 and pass through the DiscDuo; repeat on the other side.
Repeat the Pattern
Continue building RAW units and decorating each section until desired length.
Start Clasp Attachment
Add 3 seed beads, go through the ball and hitch clasp, then back through the beads.
Reinforce the Clasp
Repeat the thread path 2–3 times for strength.
Secure & Finish
Weave thread back into the design, tie knots, trim, and burn ends for a clean finish.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
This tutorial shows how to create the DiscDuo Path Bracelet using a simple right angle weave (RAW) pattern with DiscDuo beads, Tublets, and seed beads. It begins by forming a basic RAW unit and repeating a sequence of 11/0 → Tublet → 11/0 → DiscDuo to build the bracelet’s structure, then adds small decorative accents (11/0–15/0–11/0) on each side for extra detail while maintaining proper thread tension. The pattern is repeated to reach the desired length, making it an easy and relaxing project. The bracelet is finished by attaching a ball and hitch clasp, reinforcing the thread, and securing it with clean finishing techniques for a polished and customizable final piece.
Designer's Material List
The designer's suggested colors & materials:
DiscDuo Beads - White Lila Luster 6mm | Pack of 50, 14 Beads
Tubelet Beads - White Champagne Luster | Pack of 95, 18 Beads
Add Stop Bead
Place a stop bead on your thread to keep everything in place.
Start with DiscDuo
Pass through one hole of a DiscDuo bead.
Build First RAW Unit
Pick up: 11/0 → Tublet → 11/0 → DiscDuo → 11/0 → Tublet → 11/0, then go through the second hole of the first DiscDuo.
Reinforce the Unit
Go back through the top beads (11/0–Tublet–11/0) to complete the RAW “box.”
Move to Next Unit
Exit through the next DiscDuo hole to continue the pattern.
Add Side Decoration
Pick up 11/0 → 15/0 → 11/0 and pass through the DiscDuo; repeat on the other side.
Repeat the Pattern
Continue building RAW units and decorating each section until desired length.
Start Clasp Attachment
Add 3 seed beads, go through the ball and hitch clasp, then back through the beads.
Reinforce the Clasp
Repeat the thread path 2–3 times for strength.
Secure & Finish
Weave thread back into the design, tie knots, trim, and burn ends for a clean finish.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
