The Freedom Bracelet tutorial features a patriotic red, white, and blue design built using multi-row right-angle weave (RAW). Designed for beginners and intermediate beaders, this project teaches how to create a dimensional, color-blocked bracelet by weaving seed beads into stacked units. Once the base is complete, the bracelet is embellished with crystals and seed beads for sparkle and depth, followed by the attachment of a clasp and finishing touches. The tutorial walks viewers through thread paths, color arrangement, tension tips, and reinforcement techniques, while also offering guidance for adapting the piece into earrings or other formats. This tutorial is ideal for those wanting to solidify their RAW skills while making a fun and wearable bracelet.
Miyuki Seed Beads - Silver Labrador Full 15/0, ~1 Gram
Claspgarten Infinite Box Push Clasp for cabochons 10mm | 12mm | 1-Strand | Real Silver Plated, 1 Piece
Czech Cabochons - Lava Red 10mm, 1 Piece
Step 3: Need More Help? Follow these Steps
Quick Project Steps
Start the Base with RAW:
Add a stop bead and leave a 6–8" tail. Pick up 4 seed beads to form your first RAW unit (square). Stitch through the first bead to form a loop. Continue in right-angle weave (RAW): Add 3 beads for each new unit. Pass through the correct bead from the previous unit to form a square. Alternate bead colors for red and blue rows as you build.
Build Multiple Rows:
At the end of each row: Turn by stitching up the side and across the top. Begin the next row in RAW, connecting to the previous row. Build 3 rows total to create a bracelet with structure and width.
Add Crystal Embellishment:
Exit the center bead of a RAW square. Add: 1 × 15/0 → 1 × 3mm bicone → 1 × 15/0. Stitch diagonally across to form an "X" over the RAW unit. Repeat for selected RAW squares to add sparkle.
Fill in Edge Gaps:
Along the top and bottom edges: Add extra seed beads between RAW columns to smooth the edge. This also reinforces the structure and improves the look.
Attach the Clasp:
Exit an end bead at the top of a RAW unit. Add: 2 × seed beads → wire guard or loop → clasp → back through beads. Reinforce the clasp area by stitching through again. Repeat on the other side.
Reinforce & Finish:
Stitch back through multiple units for added strength. Tie off using half-hitch knots between beads. Trim or burn thread ends with a thread burner.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design.
Learn how to create beautiful and artistic RounDuo Bangle Stacker Bracelets in this DIY jewelry-making tutorial. Using RounDuo or RounDuo Mini beads paired with 11/0, 15/0, and 8/0 seed beads, this video will guide you through each step, from selecting materials to finishing with a clasp or continuous bangle design. Perfect for both beginners and advanced beaders, this project allows for endless creativity with color combinations. Shop the materials needed and follow along to create your own unique bracelet!
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Glasgow Rose Embroidered Pendant - DIY Jewelry Making Tutorial by PotomacBeads
Watch Anna Tonnesen as she provides detailed step by step tutorial instructions to learn to embroider with beads. Create the Glasgow Rose pendant or create your own masterpiece of DIY jewelry following this project tutorial. Learn how to lay out your embroidery project, cut and shape your surface, sew on beads, apply the backing and seem the sides of the piece.
Comet Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Flower Gem Earrings - DIY Jewelry Making Tutorial by PotomacBeads
Embroidered Rings - DIY Jewelry Making Tutorial by PotomacBeads
Join Our Growing Community
Our Testimonials
Only Visible on Admin Mode
Item Description
The Freedom Bracelet tutorial features a patriotic red, white, and blue design built using multi-row right-angle weave (RAW). Designed for beginners and intermediate beaders, this project teaches how to create a dimensional, color-blocked bracelet by weaving seed beads into stacked units. Once the base is complete, the bracelet is embellished with crystals and seed beads for sparkle and depth, followed by the attachment of a clasp and finishing touches. The tutorial walks viewers through thread paths, color arrangement, tension tips, and reinforcement techniques, while also offering guidance for adapting the piece into earrings or other formats. This tutorial is ideal for those wanting to solidify their RAW skills while making a fun and wearable bracelet.
Designer's Material List
The designer's suggested colors & materials:
Potomac Crystal Bicone Beads - Crystal AB 3mm, 84 Beads
Miyuki Seed Beads - Silver Labrador Full 15/0, ~1 Gram
Claspgarten Infinite Box Push Clasp for cabochons 10mm | 12mm | 1-Strand | Real Silver Plated, 1 Piece
Czech Cabochons - Lava Red 10mm, 1 Piece
Project Steps
Start the Base with RAW:
Add a stop bead and leave a 6–8" tail. Pick up 4 seed beads to form your first RAW unit (square). Stitch through the first bead to form a loop. Continue in right-angle weave (RAW): Add 3 beads for each new unit. Pass through the correct bead from the previous unit to form a square. Alternate bead colors for red and blue rows as you build.
Build Multiple Rows:
At the end of each row: Turn by stitching up the side and across the top. Begin the next row in RAW, connecting to the previous row. Build 3 rows total to create a bracelet with structure and width.
Add Crystal Embellishment:
Exit the center bead of a RAW square. Add: 1 × 15/0 → 1 × 3mm bicone → 1 × 15/0. Stitch diagonally across to form an "X" over the RAW unit. Repeat for selected RAW squares to add sparkle.
Fill in Edge Gaps:
Along the top and bottom edges: Add extra seed beads between RAW columns to smooth the edge. This also reinforces the structure and improves the look.
Attach the Clasp:
Exit an end bead at the top of a RAW unit. Add: 2 × seed beads → wire guard or loop → clasp → back through beads. Reinforce the clasp area by stitching through again. Repeat on the other side.
Reinforce & Finish:
Stitch back through multiple units for added strength. Tie off using half-hitch knots between beads. Trim or burn thread ends with a thread burner.
Bullet 1
Bullet 2
Bullet 3
You must be logged in to access the wishlist feature.
