Prepare Materials: Gather Czech spikes, wire, earwires, and Czech glass beads.
Cut Wire: Cut two pieces of 24 gauge wire, approximately 3.5-4 inches each.
Thread Spike: Insert wire through the spike, leaving a half-inch on one side.
Bend and Cross Wires: Bend wires at the top of the spike, crossing them.
Form Loop: Use round nose pliers to create a loop for attaching to the earwire.
Add Beads: Place Czech glass beads above the spike on the wire.
Secure Beads: Wrap the wire around the base and cut off the excess.
Attach Earwire: Open the earwire loop, attach the earring, and close.